whats up guys,
i have problems with my t.b from bauer, my rpms are hanging
when i rev the engine, and also at times i can go from a stop to
like 20mph with out even touching the gas pedal.
i also noticed that when i am stopping the rpm are high until i completely
stop. i removed the t.b and cleaned it, but i noticed a gap on the bottom
between the blade and t.b.
how can this be fixed?
i did email bauer about it, no response, are they still around???

 

Your blade could be sticking because it is not centered or you just need to adjust the set screw on the pass. side of the TB so the blade closes all the way.

 

ill try that today, thanks