Quick wiring question
Thread Starter
TECH Veteran
iTrader: (53)
Joined: Feb 2004
Posts: 4,433
Likes: 0
From: Monticello, Kentucky
Quick wiring question OK a buddy of mine is working on an LS1 car for someone and he ask me if I could find out something for him. First the idiot that originally did the car cut the wires on the crank position sensor. Here's the clincher, they rewired the plug with the same colored wires! They pulled apart when he was working on removing the engine. Which colors go to which pins? Is pin 1 at the top or bottom when it is plugged in? Thanks. PS, a link to a diagram is fine too.
Thread Starter
TECH Veteran
iTrader: (53)
Joined: Feb 2004
Posts: 4,433
Likes: 0
From: Monticello, Kentucky
Actually I think I found the correct wiring. I found that A=signal: yellow, B=ground: yellow/black, C=switched ignition source: green. Thanks though!
04/28/07: Using this thread as a host!
04/28/07: Using this thread as a host!
Last edited by dhdenney; Apr 28, 2007 at 10:48 AM.
