Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories

Sponsored by:

TD clamps

Reply Subscribe

Search this Thread

Old

Nov 28, 2006 | 10:36 PM

#1

Thread Starter

Launching!

iTrader: (1)

Joined: Apr 2006

Posts: 281

Likes: 0

From: Texas!

Default

TD clamps

For all you guys with the TSP kit, it comes with clamps right? Do you run them clamped or did you temporarely clamp them and got the setup welded?

Old

Nov 28, 2006 | 10:45 PM

#2

ЯєŧąяĐ Єl¡m¡иąŧøя ™

iTrader: (18)

Joined: Nov 2004

Posts: 16,083

Likes: 4

From: Justin, TX

Default

If they come with the band clamps, I would use those. Welding all your exhaust up would be a pain in the *** for future maintenance or upgrades to anything under the car.

Old

Nov 28, 2006 | 10:47 PM

#3

Thread Starter

Launching!

iTrader: (1)

Joined: Apr 2006

Posts: 281

Likes: 0

From: Texas!

Default

The clamps don't effect the sound do they, aren't they prone to leaking?

Old

Nov 28, 2006 | 10:50 PM

#4

ЯєŧąяĐ Єl¡m¡иąŧøя ™

iTrader: (18)

Joined: Nov 2004

Posts: 16,083

Likes: 4

From: Justin, TX

Default

Not good band clamps. That is pretty much what is used now. It will not affect the sound.

Old

Nov 28, 2006 | 11:01 PM

#5

That's what she said...

iTrader: (8)

Joined: Mar 2004

Posts: 7,954

Likes: 2

From: Nederland Texas

Default

I had my bullets clamped on, no problems. Band clamps work really well, especially when you get a 9/16 socket and impact, then tighten the hell out of them.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 03:58 PM.