Just Installed LT's, R/S O2 Sensor issue!!! Please Help!
Thread Starter
10 Second Club
Joined: Aug 2006
Posts: 287
Likes: 0
From: Dayton Ohio
Just Installed LT's, R/S O2 Sensor issue!!! Please Help! Alright, over the weekend I installed my pacesetter coated LT's & TSP ORY. The Fitment is excellent IMO. I didnt have to cut any tabs on the block or clearance the K-Member or Control Arms. Except for some vibration due to the Y hitting my Torque Arm and under the driver's floor, my Passenger side O2 sensor(the housing part of the O2) is touching my transmission.
It looks bad enough if I dont fix it, that it will cut my Sensor Wires. Has anybody else had this problem? Is there a cheap way to fix this like a 90 degree fitting to plug the O2 into? Anything will help. Thanks for the help!!
Chris
It looks bad enough if I dont fix it, that it will cut my Sensor Wires. Has anybody else had this problem? Is there a cheap way to fix this like a 90 degree fitting to plug the O2 into? Anything will help. Thanks for the help!!
Chris
I installed mine and they are the exact same way! All i did is tie them up real good and hope like hell they break or rub through! Down the road some when i get it on the rack im going to trim the bung down a little so the sensor will farther in the header, this should help it get a better reading also, along with a little more clearance!
Originally Posted by juicedls1
I installed mine and they are the exact same way! All i did is tie them up real good and hope like hell they break or rub through! Down the road some when i get it on the rack im going to trim the bung down a little so the sensor will farther in the header, this should help it get a better reading also, along with a little more clearance!
Trimming the bung doesnt sound like a bad idea. I was just thinking of adding another bung w/ better clearance and saving that one for a wideband once I get into some elaborate HP Tuning!! Might have to trim it instead!!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by TORK?
maybe you could grind it down
Originally Posted by LS1MONSTER
I'd like to see a pic of this if possible. No adjustment of the Y-pipe/exhaust helps at all?
Originally Posted by LS1MONSTER
I'd like to see a pic of this if possible. No adjustment of the Y-pipe/exhaust helps at all?
