B&B Tri Flow Exhaust Clips!
Thread Starter
On The Tree
Joined: Jul 2005
Posts: 108
Likes: 0
From: Houston,TX
B&B Tri Flow Exhaust Clips! I've searched all around on this forum and even looked on LS1sounds for a decent clip of B&B Tri Flow. I know not too many people have it because it's so pricey, but I figured I'd submit my clips that I made today for those who have money to spend and who are still undecided with what cat back to go with.
Anyway, hope this helps someone decide. I've got a set of Jet Hots sitting at my apartment but I just had to save $$ for a y pipe. Soon as that's added on I'll be sure to update the sound clips. Also, if you want more pics of the tips or exhaust just click my fquick link in my sig.
Enjoy!
J-WS6
Vid 1
Vid 2
Vid 2
Anyway, hope this helps someone decide. I've got a set of Jet Hots sitting at my apartment but I just had to save $$ for a y pipe. Soon as that's added on I'll be sure to update the sound clips. Also, if you want more pics of the tips or exhaust just click my fquick link in my sig.
Enjoy!
J-WS6
Originally Posted by Snuffles
The power-walker is a nice touch in the second vid. 
The money spent is well worth it. Both the sound and tips are amazing.
It's so shiny.
The money spent is well worth it. Both the sound and tips are amazing.
It's so shiny.
Haha...that looks oddly familiar! I have a B&B as well and a cutout just like yours in the same location. You have headers and a cam as well?
Trending Topics
Originally Posted by MannyZ28
Haha...that looks oddly familiar! I have a B&B as well and a cutout just like yours in the same location. You have headers and a cam as well?
If you didn't pick that up already by the bubblewrap, mis-aligned tips and tape on the bumper.
I have headers but no cam.
J-WS6: Maybe I'll get some vids up too because I have headers and a Y.
We'll see.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
On The Tree
Joined: Jul 2005
Posts: 108
Likes: 0
From: Houston,TX
Originally Posted by Snuffles
J-WS6: Maybe I'll get some vids up too because I have headers and a Y.
We'll see.
We'll see.
Originally Posted by Snuffles
That picture was while I was test fitting it.
If you didn't pick that up already by the bubblewrap, mis-aligned tips and tape on the bumper.
I have headers but no cam.
J-WS6: Maybe I'll get some vids up too because I have headers and a Y.
We'll see.
If you didn't pick that up already by the bubblewrap, mis-aligned tips and tape on the bumper.
I have headers but no cam.
J-WS6: Maybe I'll get some vids up too because I have headers and a Y.
We'll see.
Well you sure got lucky. Mine isn't anywhere near as shiny as yours. When it was new, only the muffler and the actual tips themselves were shiny, the rest wasn't polished up at all.
Thread Starter
On The Tree
Joined: Jul 2005
Posts: 108
Likes: 0
From: Houston,TX
Originally Posted by MannyZ28
Well you sure got lucky. Mine isn't anywhere near as shiny as yours. When it was new, only the muffler and the actual tips themselves were shiny, the rest wasn't polished up at all.
http://video.ls1tech.com/video/662C7...3CD10C2046.htm
http://video.ls1tech.com/video/04B7A...AE6EB40A79.htm
These are with Stainless Works long tube headers, as well as a cam...and...uhm, a cutout.
But I can tell you from experience that with just the headers on it sounds pretty much the same but has a bit more of a "scream" to it. Basically, it's the same as without headers, just a tad bit louder.
Trust me, it sounds good.
http://video.ls1tech.com/video/04B7A...AE6EB40A79.htm
These are with Stainless Works long tube headers, as well as a cam...and...uhm, a cutout.
But I can tell you from experience that with just the headers on it sounds pretty much the same but has a bit more of a "scream" to it. Basically, it's the same as without headers, just a tad bit louder.
Trust me, it sounds good.
