Descreaning MAF

Reply Subscribe

Thread Tools

Search this Thread

Feb 13, 2007 | 06:58 PM

sickws698

Thread Starter

TECH Apprentice

iTrader: (2)

Joined: Aug 2006

Posts: 384

Likes: 0

Descreaning MAF

Is it worth it descreaning my MAF. If so, how do i do this?

Feb 13, 2007 | 07:00 PM

styoung

TECH Resident

iTrader: (4)

Joined: Jan 2007

Posts: 753

Likes: 0

From: Mass

x2 i didnt do mine because when i installed my slp lid i found stuff in mine so i left it because is a dd

Feb 13, 2007 | 07:01 PM

BlackDuk98

TECH Resident

iTrader: (34)

Joined: Jul 2006

Posts: 885

Likes: 2

From: Cleveland Ohio

Quote:

Originally Posted by sickws698

Is it worth it descreaning my MAF. If so, how do i do this?

Don't do it. It won't do anything. Will cause more problems since there is no screen to block anything that gets past the air filter. Plus the screen evens-out the airflow. May run a little lean w/out it.

Most people on here will agree, Don't do it

Last edited by BlackDuk98; Feb 13, 2007 at 07:13 PM.

Feb 13, 2007 | 07:11 PM

5_02ls1

11 Second Club

iTrader: (20)

Joined: Oct 2006

Posts: 3,131

Likes: 0

From: Virginia

That Scree N Is There To Straighten Airflow.not To Catch Debris.thats The Air Filters Job.if There Is Debris In The Screen Your Lid Isnt Sealing Properly.removing The Screen Leans The A/f Ratio A Little. On A Bone Stock Car It Might Help A Little .id Say Leave The Maf Alone.ive Had A Bad Experience With The Gm Maf.