Headers are here [Pics]
Thread Starter
TECH Apprentice
iTrader: (4)
Joined: Jul 2006
Posts: 365
Likes: 0
From: UCF / Orlando, FL
Headers are here [Pics] I know there are a ton of MAC haters here, but I think I got a pretty killer deal on these and am pretty excited to get the install going.
Freshly coated.
IB4"Should have gotten long tubes."
Freshly coated.
IB4"Should have gotten long tubes."
TECH Senior Member
iTrader: (1)
Joined: Apr 2005
Posts: 8,807
Likes: 0
From: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Originally Posted by Red99TA
I know you're excited but you shouldn't sleep with your new parts 
Have fun installing them and I'm sure you'll enjoy the new power.
Have fun installing them and I'm sure you'll enjoy the new power.
Don't even have to get up..the remote is right there already.. TECH Senior Member
iTrader: (1)
Joined: Apr 2005
Posts: 8,807
Likes: 0
From: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Originally Posted by Amoretti
I know there are a ton of MAC haters here, but I think I got a pretty killer deal on these and am pretty excited to get the install going.
Freshly coated.
IB4"Should have gotten long tubes."
Freshly coated.
IB4"Should have gotten long tubes."
Thread Starter
TECH Apprentice
iTrader: (4)
Joined: Jul 2006
Posts: 365
Likes: 0
From: UCF / Orlando, FL
Originally Posted by Red99TA
I know you're excited but you shouldn't sleep with your new parts
Originally Posted by reject
lol i used to have that same remote too!! but it was a remote to a samsung 19 inch screen 
Look familiar?
Gotta love student housing.
Trending Topics
Thread Starter
TECH Apprentice
iTrader: (4)
Joined: Jul 2006
Posts: 365
Likes: 0
From: UCF / Orlando, FL
Originally Posted by NHRAMAN
Amoretti.......what diameter is your Y pipe.??? 
TECH Senior Member
iTrader: (1)
Joined: Apr 2005
Posts: 8,807
Likes: 0
From: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Originally Posted by Amoretti
I don't have measuring tape to check it right now, but it should be 2.5in. Why do you ask?
good lookin headers...pretty long compared to shorties that I almost bought.. Thread Starter
TECH Apprentice
iTrader: (4)
Joined: Jul 2006
Posts: 365
Likes: 0
From: UCF / Orlando, FL
Originally Posted by NHRAMAN
Was just wondering...Looks small...wish mine was like that...I have the Edelbrock ory and it is 3 1/8"..I am going to get another made or crush this one.. good lookin headers...pretty long compared to shorties that I almost bought..
good lookin headers...pretty long compared to shorties that I almost bought.. 
This setup just seemed like a good deal for $250
TECH Senior Member
iTrader: (1)
Joined: Apr 2005
Posts: 8,807
Likes: 0
From: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Originally Posted by Amoretti
Hmph. I would think the bigger the better?
This setup just seemed like a good deal for $250
This setup just seemed like a good deal for $250
every little speed bump it scrapes.... 
Thread Starter
TECH Apprentice
iTrader: (4)
Joined: Jul 2006
Posts: 365
Likes: 0
From: UCF / Orlando, FL
Originally Posted by NHRAMAN
Not with my Pro-Kit and in a Mountainous area it isn't... every little speed bump it scrapes....
every little speed bump it scrapes.... 
2 1/2" pipe is more than adequate since there are 2.. that go into the 3".. you dont really NEED to have 2 3" pipes to a 3"... just alot of high hp applications call for it.. but if you;re not over 400hp.. then you dont need the full 3" Y.. and if you had 400hp.. i would HOPE you had a 3 1/2-4" after the Y
Originally Posted by GR33N GoblinM6
if you had 400hp.. i would HOPE you had a 3 1/2-4" after the Y
Tech Resident
Joined: Jan 2006
Posts: 5,117
Likes: 3
From: Philly
Originally Posted by orangeapeel
Anything over 3" for an N/A 346 is rediculous.
i'm one of those mac haters the OP eluded to in his opening post. all i can say is good luck, hope you got a really good deal to warrant the purchase of mids and that they do look nice with the new coating.