Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

need a part number ASAP for lid install

Thread Tools
 
Search this Thread
 
Old 02-24-2007 | 03:52 PM
  #1  
phillyz28's Avatar
Thread Starter
TECH Regular
iTrader: (6)
 
Joined: Aug 2005
Posts: 454
Likes: 0
From: Maryland
Default need a part number ASAP for lid install

i need a grommet to fit around the IAT sensor -- i have the GM number but all the dealerships in my area are closed and im tryin to get the part at advanced.

The GM number is 24504388.

I also need pushpins, GM# 12551599.

The people at advanced were helpful and could fine the IAT sensor but had no clue about the other 2 things i needed.

I need this asap if possible. Thanks a million

Last edited by phillyz28; 02-24-2007 at 04:04 PM. Reason: correcting part numbers
Old 02-24-2007 | 03:54 PM
  #2  
WS6nJAX's Avatar
Restricted User
iTrader: (207)
 
Joined: Aug 2005
Posts: 555
Likes: 0
From: jacksonville, fl.
Default

go to the help section of the store and see if you can use a small generic one. i have used them for pcv and other applications.
Old 02-24-2007 | 03:59 PM
  #3  
2001NBMZ28's Avatar
TECH Senior Member
 
Joined: Dec 2001
Posts: 5,399
Likes: 3
From: Jacksonville, FL
Default

The GM PN for the IAT sensor is 12160244 - the PN for the grommet is 24504388, maybe they can cross reference it.
Old 02-24-2007 | 04:02 PM
  #4  
phillyz28's Avatar
Thread Starter
TECH Regular
iTrader: (6)
 
Joined: Aug 2005
Posts: 454
Likes: 0
From: Maryland
Default

Originally Posted by 2001NBMZ28
The GM PN for the IAT sensor is 12160244 - the PN for the grommet is 24504388, maybe they can cross reference it.

yeah -- i screwed up the original post...

those were the parts numbers that i gave them -- i think they tried to do that but it came up empty.
Old 02-24-2007 | 04:35 PM
  #5  
kevins2000LS1's Avatar
TECH Enthusiast
iTrader: (11)
 
Joined: Oct 2006
Posts: 591
Likes: 0
From: Greenville,NC
Default

yeah i had to buy one also from GM. the advanced auto had some but didnt fit quite right. I think it was like $2.44 for the local dealer. Also i did have one dealer tell me that i had to buy a whole pack of 5 but, thats not true you can get just one
Old 02-24-2007 | 04:36 PM
  #6  
kevins2000LS1's Avatar
TECH Enthusiast
iTrader: (11)
 
Joined: Oct 2006
Posts: 591
Likes: 0
From: Greenville,NC
Default

As far as part number just tell them you need one for what year and model and if they are any good they will find it
Old 02-24-2007 | 04:43 PM
  #7  
phillyz28's Avatar
Thread Starter
TECH Regular
iTrader: (6)
 
Joined: Aug 2005
Posts: 454
Likes: 0
From: Maryland
Default

thanks, i guess ill just wait till monday to put this in -- was hopin to get it in today but all the dealers are closed and nobody could find anything at advanced. It supposed to snow tomorrow and shitty weather all next week so this might have to wait a little longer



Quick Reply: need a part number ASAP for lid install



All times are GMT -5. The time now is 08:54 PM.