Lid problems...
Thread Starter
11 Second Club
iTrader: (10)
Joined: Feb 2006
Posts: 2,215
Likes: 2
From: Sterling Heights, MI
Lid problems... I bought an MTI lid off of another member on the site and am at my girlfriends trying to install it and haveing a hell of a time....
i have the stock intake off, the IAT senser in the new lid, but the lid wont go onto the MAF... like the maf looks to be bigger than the lid... as far as i know everything is stock on the car... is there supposed to be a coupler that i didnt get and should go buy or what?
i need help as i only have an hour before i have to leave and want to get this done before next week
thanks
i have the stock intake off, the IAT senser in the new lid, but the lid wont go onto the MAF... like the maf looks to be bigger than the lid... as far as i know everything is stock on the car... is there supposed to be a coupler that i didnt get and should go buy or what?
i need help as i only have an hour before i have to leave and want to get this done before next week
thanks
Trending Topics
You could also file or sand down the edge on the stock MAF to help it loosen up a little bit. Also look inside the lid to see if there is any excess molding flash that can be sanded or filed down. My lid is real tight on the stock MAF but my car also came with a GMS MAF so I run that and it fits a little better.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Thread Starter
11 Second Club
iTrader: (10)
Joined: Feb 2006
Posts: 2,215
Likes: 2
From: Sterling Heights, MI
thanks for all the responses guys, i ended up getting a coupler for it, slid over both of them perfectly and is hose clamped on. Ill post a picture and show you tomorrow