Stainless Hoses
Thread Starter
TECH Apprentice
iTrader: (2)
Joined: Nov 2001
Posts: 365
Likes: 0
From: Crossroads, Texas
Stainless Hoses I was thinking of replacing all of my hoses with the stainless hoses and fitings like alot of the true drag racers have. Does anyone have any pics of these hoses on an LS1. I hope you understand what kind of hoses I am talking about. They have the braided stainless mesh around the hose and they have blue and red fittings. Thanks.
TECH Enthusiast
Joined: Nov 2001
Posts: 617
Likes: 0
From: Milford, Ohio
Re: Stainless Hoses Take a look at Spectre's hoses. They have braided hose to be used as heater, vaccum and vent line. They also make hose clamps to use with it that have the clamps hidden by what look like briaded line hose ends. It is much less expensive than using actual braided line and figuring out all the adapters needed to work with otherwise stock motor parts.
<small>[ March 22, 2002, 12:47 AM: Message edited by: Chris Spiess ]</small>
<small>[ March 22, 2002, 12:47 AM: Message edited by: Chris Spiess ]</small>
