What length O2 simms do I need for a custom ORP?
Thread Starter
TECH Junkie
iTrader: (3)
Joined: Nov 2001
Posts: 3,078
Likes: 1
From: Republic of Texas
What length O2 simms do I need for a custom ORP? Going to have a custom ORP made for my Hookers. Thunder Racing sells the in 12", 24" and 42" lengths. What length do I need to buy?
Re: What length O2 simms do I need for a custom ORP? I think you are mixing up O2 sims and O2 extensions. O2 sims take the place of the actual O2s and fool the computer into thinking that the O2 are working at optimum. Whereas the O2 extension is just that, it extends the length of the O2 hardness.
With ORP you will need just the plug in O2 sims. They plug into the O2 hardness and than you tie them off - I tied them to the frame.
David
With ORP you will need just the plug in O2 sims. They plug into the O2 hardness and than you tie them off - I tied them to the frame.
David
Thread Starter
TECH Junkie
iTrader: (3)
Joined: Nov 2001
Posts: 3,078
Likes: 1
From: Republic of Texas
Re: What length O2 simms do I need for a custom ORP? DOH! I feel dumb now. But, do I need extensions for the rear sensors? I know I need them for the front sensors because they came with the headers.
Re: What length O2 simms do I need for a custom ORP? If you are going to be using ORP you do NOT want to hook up the sensors - it would throw an SES light. Just use the sims. Leave the O2 in the rear holes, plug in the sims, tie off the sims to the frame. Done.
David
David
