Here's a trick question.
Thread Starter
TECH Regular
iTrader: (2)
Joined: Dec 2001
Posts: 479
Likes: 0
From: Las Vegas, Nevada
Here's a trick question. Ok I currently have SLP LT's on my 2000. The problem I have with them is the top ring connected to the wiring on the O2 sensors, rattles like crazy. I have the 3 inch Y-pipe that came with the headers. I took it to a exhaust shop here in Vegas, and he said they can't be fixed, because he tried to weld them, and the welds actually melts the wiring. Is this guy full of BS or is there something I can do with all four sensors. A few of my club members don't have this problem, thats why I'm confused. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> The reason it bugs me is because it sounds like metal to metal vibration, and you can hear it 10 ft away from the car. Any ideas? Thanks. <img border="0" alt="[whiner]" title="" src="graemlins/gr_cry.gif" />
TECH Resident
Joined: Nov 2001
Posts: 770
Likes: 0
From: the third rock from the sun!
Re: Here's a trick question. D@mn, I thought it was just me with this problem. Been driving me nuts. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
I can hear it really good at startup. Sounds like coins jingling.
I was afraid a piece of the cat brick had broken off and was rattling around in there but then I was under the car one day and just started beating on stuff <img border="0" alt="[judgement]" title="" src="graemlins/gr_judge.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> to see if I could find the rattle and found that those caps were loose.
Are ya'll sure the RTV or tape won't melt or foul the sensors???
<small>[ April 07, 2002, 02:00 PM: Message edited by: WEASEL ]</small>
I can hear it really good at startup. Sounds like coins jingling.
I was afraid a piece of the cat brick had broken off and was rattling around in there but then I was under the car one day and just started beating on stuff <img border="0" alt="[judgement]" title="" src="graemlins/gr_judge.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> to see if I could find the rattle and found that those caps were loose.
Are ya'll sure the RTV or tape won't melt or foul the sensors???
<small>[ April 07, 2002, 02:00 PM: Message edited by: WEASEL ]</small>
TECH Fanatic
Joined: Feb 2002
Posts: 1,089
Likes: 0
From: New Jersey
Re: Here's a trick question. I have used a stainless steel CV joint straps that are a type of "crimp lock" in the past, there about 1/8 of an inch wide and they fit perfect and don't loosen up. Or I am sure High Temp RTV will work too, never tried that.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Regular
iTrader: (2)
Joined: Dec 2001
Posts: 479
Likes: 0
From: Las Vegas, Nevada
Re: Here's a trick question. Well I wrapped them today with tape and so far it sounds pretty good. I think they still rattle a bit though. Oh well. <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
