Air/Fuel, Scanmaster + MAFT help...
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Nov 2001
Posts: 681
Likes: 0
From: Hockeytown/MotorCity
Air/Fuel, Scanmaster + MAFT help... I am having trouble reading it. My Scanmaster Ltrms are always above zero which means im lean?
I put on SVO 30#(37 on ls1) injectors so I would think im rich as hell without spray.
My 02 on recal is around 750-910 mostly high 800s. I am getting 3.4 knock retard often, and my ltrms are always ranging 0-14. depending how much throttle i give.
This is with my Maft set to -2% and 2% retarded..
I put on SVO 30#(37 on ls1) injectors so I would think im rich as hell without spray.
My 02 on recal is around 750-910 mostly high 800s. I am getting 3.4 knock retard often, and my ltrms are always ranging 0-14. depending how much throttle i give.
This is with my Maft set to -2% and 2% retarded..
Re: Air/Fuel, Scanmaster + MAFT help... This will do better in Tuning...
https://ls1tech.com/ubb/cgi-bin/ulti...;f=23;t=000755
<small>[ April 18, 2002, 08:00 AM: Message edited by: WILWAXU ]</small>
https://ls1tech.com/ubb/cgi-bin/ulti...;f=23;t=000755
<small>[ April 18, 2002, 08:00 AM: Message edited by: WILWAXU ]</small>
