I think ive been mislead....
I think ive been mislead.... I was under the impression that flp headers were the best. I am going to be installing a tr 230/224 cam and a set of stage two heads. I am looking for a set of headers to go with my electronic cutout and stock exhaust. I was planning on using flp's and off road y pipe then through my cutout. When I wanted it quiet close the cutout and send it through the stock exhaust. but I am hearing that there are better headers out there. I can get a set of flp's with offroad y pipe for $800 slightly used. guys help me out <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Teching In
Joined: May 2002
Posts: 40
Likes: 0
From: Thousand Oaks,California
Re: I think ive been mislead.... I have the Mac's on this page maybe check them out.Had mine on for 2 years and no leaks but I did put in the air-restrictor plate mod.They have a good ceramic coating on them that is holding up well so far.I have not had a dyno for the hp number but most claim 10-20 increase.I feel it was worth it.
http://www.motorsporttech.com/ls1/index.html
http://www.motorsporttech.com/ls1/index.html
Guest
Posts: n/a
Re: I think ive been mislead.... I gained 10-15 hp from the mac with orp, and T1 cam for a total of 44hp gained about 30 hp from the cam...I am happy with the macs
new set up on its way.. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> <img border="0" alt="[Firebird]" title="" src="graemlins/formula.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
new set up on its way.. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> <img border="0" alt="[Firebird]" title="" src="graemlins/formula.gif" /> <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
TECH Apprentice
Joined: Nov 2001
Posts: 350
Likes: 0
From: Lexington, SC
Re: I think ive been mislead.... Seems like I've always heard that Grots were the best. I don't really keep up with longtubes that well since I've got a set of MACs going in. Some of the big hp guys are going with stepped Dynatech headers. Don't know much about them either.
Launching!
Joined: Dec 2001
Posts: 237
Likes: 0
From: Raleigh, NC
Re: I think ive been mislead.... Grots seem to be the favorite(if you can find them without going through Roger Grot.), but the new Hooker's look almost as good to me. Somone had a page with LT comparisons, and I wouldn't use any other than hookers or grots.
Good luck with whatever you choose.
Jay
Good luck with whatever you choose.
Jay
