help with victor jr
Haven't seen anyone try and use the stock rails.
Edelbrock's website says it uses "Uses LS1/LS6 style individual port o-ring seals." http://www.edelbrock.com/automotive_...b_vic-jr.shtml
Edelbrock's website says it uses "Uses LS1/LS6 style individual port o-ring seals." http://www.edelbrock.com/automotive_...b_vic-jr.shtml
On The Tree
Joined: Jun 2004
Posts: 132
Likes: 0
From: Melbourne, Australia
I bought the Edelbrock rails and they work fine. I wouldn't bother trying to adapt the stock setup. I made my own rails for my LS6 manifold but for the price of the Edelbrock rails I didn't bother to make a set for this manifold. I think they were less than $100 extra when I bought the manifold.
Here's the Edelbrock Victor setup
Here's my old LS6 setup
Here's the Edelbrock Victor setup
Here's my old LS6 setup
