Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

running rough after LT install

Old Aug 23, 2007 | 07:37 PM
  #1  
joinpa's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Jun 2006
Posts: 33
Likes: 0
From: Punxsutawney, PA
Default running rough after LT install

Just finished installing Pacesetter LTs and TSP catted Y. Went pretty well but car seems to be running rough. No apparent miss, no time tonight for trouble shooting. Anybody want to offer a place to start the search? Is there a wire that is commonly knocked off or something like that. Did recheck the plugs and wire connections and they seemed fine. Rear O2s are gone but understand that won't affect motor. Any help would be great.
Reply
Old Aug 23, 2007 | 09:08 PM
  #2  
Numba1Stunna's Avatar
TECH Enthusiast
iTrader: (4)
 
Joined: Dec 2006
Posts: 516
Likes: 0
Default

ur front o2s could be shot, recheck the plugs, i could be running too rich too
Reply
Old Aug 23, 2007 | 09:53 PM
  #3  
TheLS1Kid's Avatar
TECH Fanatic
iTrader: (12)
 
Joined: Oct 2006
Posts: 1,724
Likes: 0
From: Orlando, FL
Default

Make sure one of the plugs isn't cracked.

I've done that before on my old 96 Camaro, it ran like crap but didn't throw a SES light so I finally figured out it was a cracked plug.
Reply
Old Aug 23, 2007 | 10:08 PM
  #4  
'00_Z's Avatar
TECH Fanatic
iTrader: (3)
 
Joined: Aug 2004
Posts: 1,458
Likes: 0
From: holding down the couch
Default

Double check the plug wires are on tight. Believe it or not it took us a week to figure it out. #8 is a bitch!
Reply
Old Aug 23, 2007 | 10:21 PM
  #5  
98TA_vert's Avatar
On The Tree
 
Joined: Mar 2005
Posts: 156
Likes: 0
From: South Jersey
Default

Reply
Old Aug 23, 2007 | 11:13 PM
  #6  
95 Z28's Avatar
12 Second Club
iTrader: (21)
 
Joined: Apr 2006
Posts: 1,406
Likes: 0
From: West Seneca, NY
Default

Originally Posted by TheLS1Kid
Make sure one of the plugs isn't cracked.
+1 ....even a hairline crack can cause problems....other than that, make "sure-sure" all of your plug wires are on properly, you should hear/feel 2 clicks when popping them on.
Reply
Old Aug 23, 2007 | 11:52 PM
  #7  
tylerdj's Avatar
TECH Fanatic
iTrader: (31)
 
Joined: Sep 2004
Posts: 1,912
Likes: 0
From: Amarillo, TX
Default

Like everyone else said....check all of your plugs for even a tiny crack, this is a very very common problem when people install LT's. If they are all fine then you probably have a problem with your front O2's.
Reply
Old Aug 23, 2007 | 11:53 PM
  #8  
Boosted 99 TA's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Mar 2006
Posts: 336
Likes: 0
From: Burton, MI
Default

another guess maybe you bumped your coolant temp sensor when you were gettin the headers up. Just a thought
Reply
Old Aug 23, 2007 | 11:57 PM
  #9  
tylerdj's Avatar
TECH Fanatic
iTrader: (31)
 
Joined: Sep 2004
Posts: 1,912
Likes: 0
From: Amarillo, TX
Default

Originally Posted by Boosted 99 TA
another guess maybe you bumped your coolant temp sensor when you were gettin the headers up. Just a thought
Good idea
Reply
Old Aug 24, 2007 | 05:11 AM
  #10  
joinpa's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Jun 2006
Posts: 33
Likes: 0
From: Punxsutawney, PA
Default

Thanks for the info, I'll start checking tonight. If anyone else has an "i found" please add on. Thanks again this forum is great.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:27 AM.