need advice.. (muffler)
Thread Starter
Launching!
Joined: Jun 2006
Posts: 296
Likes: 0
need advice.. (muffler) my exhaust sounds raspy, would a SLP "Loudmouth" Shotgun Resonator bullet muffler clean it up some? and is it going to be super quiet after putting it on? i want to keep it loud, but just clean up some of the sound to where it doesnt sound like s*&^ lol
thanks,
michael
thanks,
michael
well after recently changing my LM1 to an LM2 i can tell you
there is not a huge difference, but there is a difference.
i suggest getting a catback with a muffler (magnaflow, hooker, borla)
you can most likely get a good price for your GMMG.
i personally have grown sick of my LM1/LM2 and eventually will get a magnaflow.
FYI a magnaflow can be found on EBAY for $350.00 shipped.
BTW the LM1 is just a big empty can.
also the resonator will need to be offset in the i pipe area.
you will probably need the LM2 retro fit kit.
at the front of the LM1 resonator the inlet has a slight bend in it
and unless your catback is similar you will need some custom bending to fit it.
hope this helps.
there is not a huge difference, but there is a difference.
i suggest getting a catback with a muffler (magnaflow, hooker, borla)
you can most likely get a good price for your GMMG.
i personally have grown sick of my LM1/LM2 and eventually will get a magnaflow.
FYI a magnaflow can be found on EBAY for $350.00 shipped.
BTW the LM1 is just a big empty can.
also the resonator will need to be offset in the i pipe area.
you will probably need the LM2 retro fit kit.
at the front of the LM1 resonator the inlet has a slight bend in it
and unless your catback is similar you will need some custom bending to fit it.
hope this helps.
Last edited by shoemike; Feb 17, 2008 at 12:09 AM.
Magnaflow bullet #14419 is a good one. I have two on my true dual setup and it's so much better than the LM1 I had. No rasp at all. It's deep and still demands everyone to look when go by.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Launching!
Joined: Jun 2006
Posts: 296
Likes: 0
ok so the magnaflow BEFORE my 2 gmmg mufflers, would that still have sound to it with headers & no cats?
heres what i think im gonna do if it is nasty raspy w/o any extra mufflers.. the magnaflow on the i-pipe before my gmmg mufflers to kill the rasp and quiet it down some(for when i dont wanna hear the super loudness all the time) and an electric cutout before the magnaflow. my question now is... does anyone think i should put the cutout after the magnaflow? and will it have any sound with the exhaust going through both the GMMG and the magna bullet..
sorry if i sound confusing, just got off an 12 hr shift lol
anyways, thanks
michael
heres what i think im gonna do if it is nasty raspy w/o any extra mufflers.. the magnaflow on the i-pipe before my gmmg mufflers to kill the rasp and quiet it down some(for when i dont wanna hear the super loudness all the time) and an electric cutout before the magnaflow. my question now is... does anyone think i should put the cutout after the magnaflow? and will it have any sound with the exhaust going through both the GMMG and the magna bullet..
sorry if i sound confusing, just got off an 12 hr shift lol
anyways, thanks
michael