Goodbye QTP, hello DMH
Goodbye QTP, hello DMH I currently have a 3" Dynomax dump welded in my intermediate pipe and 3" a QTP electric cutout was installed on the dump. After about 8 months, my QTP cutout took a "dump" (the valve will no longer properly open or close). Since QTP doesn't warrant their product for over 90 days, I'd prefer to just buy a DMH and have the peace of mind that when it gives up (as pretty much all electric cutouts eventually do) I can just send it back and have it replaced.
Has anyone ever mounted their DMH cutout to the Dynomax dump? It looks like it will fit as there are only 3 twist bolts that hold the electric valve on the cutout, however I wanted to make sure there would be no fitment problems before I pull the trigger. Anyone have a picture of the DMH unit installed on their car?
Thanks!
Has anyone ever mounted their DMH cutout to the Dynomax dump? It looks like it will fit as there are only 3 twist bolts that hold the electric valve on the cutout, however I wanted to make sure there would be no fitment problems before I pull the trigger. Anyone have a picture of the DMH unit installed on their car?
Thanks!
