Opinions on Moroso Spiral Flows
Thread Starter
TECH Addict
iTrader: (3)
Joined: Apr 2005
Posts: 2,905
Likes: 0
From: Northern Kentucky
Opinions on Moroso Spiral Flows Ok well im getting custom true duals and looking for a great sounding muffler for a good price. I hear a lot of good things about the spiral flow mufflers and want to know everyones opinion on the quality and sound. Also sound clips would be greatly appreciated along with pics.
i just got 2 dynomax's from summit.....paid 91.45 shipped for 2 and got them next day!!!there are tons of them on
www.ls1sounds.com
www.ls1sounds.com
Love them. I wanted a nice "right out of the box" setup so I did the TSP Duals with Spirals. Never heard them in person, just a vid, but was hooked. Clip in sig. I have another at idle with my cam if you search on the same vid site.
-J
-J
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Ok well im getting custom true duals and looking for a great sounding muffler for a good price. I hear a lot of good things about the spiral flow mufflers and want to know everyones opinion on the quality and sound. Also sound clips would be greatly appreciated along with pics.
I love my spiral flows! I would never change out these things for any thing else. The best way I can describe the sound is that it sounds natural. Like you can really hear the motor not just some alterd noise like a dyno max or somthing else that is packed with fiber glass. There low price and high quality. The only thing I would have done different is buy the stainless ones but I didnt have the money. Not like that really matters I dont drive it in the winter. Good luck!
Before Cam:
http://vids.myspace.com/index.cfm?fu...ideoID=1048894
http://vids.myspace.com/index.cfm?fu...ideoID=1329221
After the Cam:
http://vids.myspace.com/index.cfm?fu...ideoID=5641948
On the rollers:
http://youtube.com/watch?v=NbnkAgLhKno&feature=related
I have a couple videos around
http://vids.myspace.com/index.cfm?fu...ideoID=1048894
http://vids.myspace.com/index.cfm?fu...ideoID=1329221
After the Cam:
http://vids.myspace.com/index.cfm?fu...ideoID=5641948
On the rollers:
http://youtube.com/watch?v=NbnkAgLhKno&feature=related
I have a couple videos around
For me, personally, I couldnt stand the interior resonance of SF's on my TD set up. They were dumped before the axle. Standing outside the car, it sounds AWESOME. But the interior sound sucked. Like I said, this is my opinion.
My current set up is 3inch piping, cats, x-pipe, then edelbrock 304's. The sound is perfect. Its still loud, but no drone whatsoever at cruising rpms. The SF's drone to me, is horrible at cruising rpms.
My current set up is 3inch piping, cats, x-pipe, then edelbrock 304's. The sound is perfect. Its still loud, but no drone whatsoever at cruising rpms. The SF's drone to me, is horrible at cruising rpms.
My interior noise is just fine with my SFs, even with the cam. My trans makes a far more annoying sound than the duals in 5th and 6th gear. Angle the dumps out or run 'em out the back. Did you have cats on your SF setup?
-J
-J
