BeCool Radiator ?
Thread Starter
TECH Enthusiast
Joined: Dec 2001
Posts: 601
Likes: 0
From: Texas
BeCool Radiator ? I'll picking one of these up for my Z, but I wanted to get an idea of how much larger this unit it is. Im also going to be pairing this up with the new Meizere street pump so I want to make sure clearance isn't an issue. Does anyone know what the stock or SLP dimensions are ?
Here are the Be Cool dims :
Core Dimensions - Medium, 22''wide x 18''high
Overall Dimension - 29''wide x 19''high
Designed for up to 400-HP applications.
Thanks in advance
Here are the Be Cool dims :
Core Dimensions - Medium, 22''wide x 18''high
Overall Dimension - 29''wide x 19''high
Designed for up to 400-HP applications.
Thanks in advance
Re: BeCool Radiator ? I am currently running the BeCool radiator in my SS. The core is much thicker, and it moves the fans further back about an inch. This makes for a very tight fit for things like the upper radiator hose, especially if you have the power steering cooler.
Otherwise, this thing rules. And you do not have to make any brackets to mount it, the factory parts all work.
Ryan K.
Otherwise, this thing rules. And you do not have to make any brackets to mount it, the factory parts all work.
Ryan K.
Thread Starter
TECH Enthusiast
Joined: Dec 2001
Posts: 601
Likes: 0
From: Texas
Re: BeCool Radiator ? Thanks Ryan,
Now Im just wondering if the Be Cool will clear the Meziere unit once it truly hits the streets. Since my ride is a Z I don't have the PS cooler but moving back 1 inch is cutting things really damn close.
Im guessing that you had to modify the lower air box as well as the lower mounts to compensate for the larger width.
Now Im just wondering if the Be Cool will clear the Meziere unit once it truly hits the streets. Since my ride is a Z I don't have the PS cooler but moving back 1 inch is cutting things really damn close.
Im guessing that you had to modify the lower air box as well as the lower mounts to compensate for the larger width.
On The Tree
Joined: Feb 2003
Posts: 140
Likes: 0
From: cypress
Re: BeCool Radiator ? You will have to get a new lower raadiator hose with the Meziere unil(I have the drag only pump). You also have to cut the lower air box and the frame rail that the radiator sits on.
Re: BeCool Radiator ? You must have gotten a bum unit as mine sits inn the frame rail and air box with no issues at all. Also, with the street unit you will not need any new hoses. it still uses all the factory components(just got off the phone with them at 4:50).
Ryan
Ryan
Trending Topics
Re: BeCool Radiator ? nice....too bad I still have to get a new front tire (F1 super car) and 1.8 rockers before I can even think of spending $1K for a new rad and a water pump 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
