LS1 carb setup???
Thread Starter
On The Tree
iTrader: (2)
Joined: Aug 2005
Posts: 113
Likes: 0
From: near longview, texas
LS1 carb setup??? Alright guys, don't know if this is where I should post this or not. Me and a friend are building a 1973 camaro and been throwing around the idea of a LS1 in it, but the problem being(I know this sounds kinda dumb), but we want it to look as old school as possible under the hood. My question is there are company selling a complete kit to change over to a carburetor setup and is it really expensive or not?
Thread Starter
On The Tree
iTrader: (2)
Joined: Aug 2005
Posts: 113
Likes: 0
From: near longview, texas
ok so I dug around (and used the search function) lol. I have come across pretty much everything to do this except for what type of fuel pump to use. I know it's gotta be inline electric , but which one, there are so many, and all rated differently, I don't wanna wind up going with the wrong one if I decide on doing this. Also , if I was to go with a 5.3 and use a T56, does the T56 have anything computer related you need to plug in????
11 Second Club
iTrader: (27)
Joined: May 2005
Posts: 6,799
Likes: 5
From: Your girl's back door giving her the long stroke while you're at work
I'm running a carb on my TA. Edelbrock makes a kit with the intake and control box for $660. I put a Holley black race pump on my car and took the stocker out of the tank. I am also running two Holley fuel pressure regulators, one for the motor and one for the nitrous
https://ls1tech.com/forums/showthrea...9065&highlight=
https://ls1tech.com/forums/showthrea...9065&highlight=
