Fast 90 Install

Reply Subscribe

Thread Tools

Search this Thread

Jun 14, 2008 | 07:05 PM

udluuz

Thread Starter

Teching In

Joined: Feb 2008

Posts: 3

Likes: 0

From: Montgomery

Fast 90 Install

I'm in the middle of installing a Fast 90 intake on my 04 GTO, i have a question.

I bought the intake used and i dont have the intake valley button head bolts.
Someone told me that with my LS1 that i dont need them.

I had an issue with my intake not seating properly, i thought it had to do with the intake valley bolts but it turns out i had bend the coolant tube that runs from head to head because the manifold was sitting on it.

So my question is do i need those bolts?

I went everywhere today looking for them i couldnt find that type of bolt anywhere.

Jun 14, 2008 | 07:25 PM

ceo44

On The Tree

Joined: Mar 2005

Posts: 166

Likes: 0

From: Kansas City Area

Yes, you need these. They are mandatory if you want your intake to seal properly. Most hardware stores have SS button heads.

Jun 14, 2008 | 07:34 PM

Martin HD-28

TECH Enthusiast

iTrader: (16)

Joined: May 2006

Posts: 688

Likes: 1

From: E'town Kentucky

You'll bust your intake. GET THOSE BOLTS!!

Jun 14, 2008 | 07:34 PM

udluuz

Thread Starter

Teching In

Joined: Feb 2008

Posts: 3

Likes: 0

From: Montgomery

Yeah i went everywhere Ace,Homedepot,truevalue nobody has em.
They all had button head bolts but they only had up to 6mm.

But thank for the answer i figured as much.