Headers installed now starter problems
Thread Starter
Launching!
Joined: Jul 2005
Posts: 267
Likes: 0
Nope i never touched the starter the headers slid right in didn't need to move anything. The car ran perfectly fine before the headers, took off the old exhaust disconnected all the coil packs on the passenger side and changed the plugs and wires. I'm going to check everything out on thursday when im off from work. Sometimes if you let off on trying to crank it, it seems to fire but since you let off it like backfires. I plan on getting it all working on thursday when im off from work.
Thread Starter
Launching!
Joined: Jul 2005
Posts: 267
Likes: 0
It seems to be fixed i took off all the plug wires and swapped them to the other side and it seems to work well now. Well it did work good for a while not it doesn't can one of the scanners check and see if something is bad if i brought it up to autozone? Thanks for the help guys.
Last edited by 98 Z28; Jul 1, 2008 at 07:07 PM.
Thread Starter
Launching!
Joined: Jul 2005
Posts: 267
Likes: 0
Lol its on for at the least no rear o2's, no egr and no air. But its driving me crazy I am going to try another battery on it thursday when i get a chance. I'm gonna jack it up thursday too and check under it to make sure i didn't mess up any of the wires. If i can't figure it out thursday im going to do the fuel filter next.
