headman headers
You'll regret buying a header with a 1/4" flange, and their ball and socket collector is some sort of joke, if those flanges were 1/2" thick it might work.
I've used Hedmans before with no problems, but the ball and socket type I have them on my truck, they're garbage.
I've used Hedmans before with no problems, but the ball and socket type I have them on my truck, they're garbage.
I hated the headmans on my 98 TA, drivers side primary tube still banged on the k member when the engine would lope, even after trimming pretty much all of the k member lip. Driver side collector was kicked out to the outside of the car big time and was also very close to the floor. Ball collector was a joke and is anything z would think it would hinder flow.... But on a good note the actual bolting of them to the block and sliding them in was easy!!!!!
Ive had mine for 3 years or so..My first shop that installed them they banged,so I did the old header wrap between the floor board..got heads in stalled 1 1/2 years ago at a different shop and the banging whent away and no header wrap between the floorboard..
