ported TB installed
ported TB installed I ordered a Ported TB by Jantzer through Chris at CC Performace great product and service and i got it in only a few days. I didnt opt for them to paint it or anythin and when i got it I decided i would paint it myself. took it a part scuffed it up and cleaned it and then sprayed 3 coats of a a night black metallic enamel a really cool color i think. It looks black on the cap but its more like a really dark gray kinda like the dark carbon color GM has on there trucks. I then sprayed 4 coats of clear and let it sit overnight.
So today i get home from church and start at it get the old TB off transfer the sensors over and went to put it on got the 3 bolts started. then started tightening the 2nd one and it just snapped in half. fun fun so my Dad and I play with it a bit to see if we could back it out tried all our plyers and wrenches nothing could get ahold of it. so we got out the dremel and cut a groove in it and able to get it out that way very lucky we didnt have to do more.
So went and got some mroe bolts and a 2ft 5/16 fuel line hose to bypass the coolant going into the TB got everything bolted back on and it does seem to run better and have better response when i hit the gas ill take it to the track in a week or two and see if its enough to drop me that .11 to get into the 12s.
well here is some pictures enjoy.
Installed on the car
So today i get home from church and start at it get the old TB off transfer the sensors over and went to put it on got the 3 bolts started. then started tightening the 2nd one and it just snapped in half. fun fun so my Dad and I play with it a bit to see if we could back it out tried all our plyers and wrenches nothing could get ahold of it. so we got out the dremel and cut a groove in it and able to get it out that way very lucky we didnt have to do more.
So went and got some mroe bolts and a 2ft 5/16 fuel line hose to bypass the coolant going into the TB got everything bolted back on and it does seem to run better and have better response when i hit the gas ill take it to the track in a week or two and see if its enough to drop me that .11 to get into the 12s.
well here is some pictures enjoy.
Installed on the car
I took the blade and shaft off then scufed it up and cleaned it off then used the blue painters tape to tape it off then sprayed 3 coats of color 4 coats of clear and let it sit for almost 24 hours.
Tech Resident
Joined: Jan 2006
Posts: 5,117
Likes: 3
From: Philly
Cool. Did it require any special tools to get the blade and shaft off, like hex tools or something?
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
here are some pictures of the bypass hose i did its a 5/16 fuel line hose 2 feet long. the radiator side is a tight fit but so far it seems to be working just fine no problems at all it is the small hose in the middle.
