LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Generation III External Engine
Need Imediate Help

Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories

Sponsored by:

Need Imediate Help

Reply Subscribe

Search this Thread

Old

Sep 20, 2008 | 04:52 AM

#1

Thread Starter

Staging Lane

Joined: Mar 2007

Posts: 65

Likes: 0

From: Charlotte

Default

Need Imediate Help

I just installed my QTP LT's everything is on the car and working great with the exception of the lower intermediate steering shaft. It it hitting the outter most tube on the drivers side header. What can I do here? Does anyone make a longer piece that will fit this car? It seems to me the section after the U-joint where the shaft connects to the rack is the part thats too short. If i could find a way to extend this about 1 to 1-1/4 inch it would work.

Old

Sep 20, 2008 | 04:59 AM

#2

11 Second Club

iTrader: (13)

Joined: Mar 2007

Posts: 2,870

Likes: 2

From: delaware

Default

grinder or a hammer

Old

Sep 20, 2008 | 05:11 AM

#3

Thread Starter

Staging Lane

Joined: Mar 2007

Posts: 65

Likes: 0

From: Charlotte

Default

Theres nothing to grind. the part thats touching the headers is hollow tubing. Also attempted the hammer method the parts simple too short.

Old

Sep 23, 2008 | 09:17 AM

#4

Thread Starter

Staging Lane

Joined: Mar 2007

Posts: 65

Likes: 0

From: Charlotte

Default

Problem is fixed. just bent the header tube out of the way. Only needed about a 1/4 of an inch.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 10:46 AM.