Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

My new stroker motor

Thread Tools
 
Search this Thread
 
Old 10-15-2008 | 08:54 PM
  #1  
Revengracing14's Avatar
Thread Starter
Teching In
 
Joined: Feb 2008
Posts: 9
Likes: 0
Default My new stroker motor

Hey guys. Iv been on this site reading a lot but i have never really posted anything. So i have just bought a brand new ls2 block., Eagle forged rods and crank, and Mahale pistons. A custom cam is in the works. Its a 238/240dur 605/608lift from comp cams. Afr 225's and the fast 92 with 90mm TB are to come and then ill be putting it all in a 2000 c5. i already have the rpm stage 5 six speed and the LS7 clutch. Well just letting everyone know what the plans were.
Old 10-15-2008 | 09:58 PM
  #2  
Mike94ZLT1's Avatar
TECH Fanatic
iTrader: (3)
 
Joined: Feb 2004
Posts: 1,455
Likes: 0
From: Livonia, Mi
Default

Originally Posted by Revengracing14
Hey guys. Iv been on this site reading a lot but i have never really posted anything. So i have just bought a brand new ls2 block., Eagle forged rods and crank, and Mahale pistons. A custom cam is in the works. Its a 238/240dur 605/608lift from comp cams. Afr 225's and the fast 92 with 90mm TB are to come and then ill be putting it all in a 2000 c5. i already have the rpm stage 5 six speed and the LS7 clutch. Well just letting everyone know what the plans were.

Sounds like a pretty solid setup, but you're gonna want to get something other than that piece of **** for a clutch.
Old 10-15-2008 | 10:04 PM
  #3  
stevied916's Avatar
TECH Enthusiast
iTrader: (30)
 
Joined: Jul 2007
Posts: 546
Likes: 1
From: Sacramento, CA
Default

That's a decent clutch, I run it but have only a 346 with bolt ons. You will probabally burn it up with anything more than street tires
Old 10-15-2008 | 10:07 PM
  #4  
Revengracing14's Avatar
Thread Starter
Teching In
 
Joined: Feb 2008
Posts: 9
Likes: 0
Default

ill have the motor out for the swap so i can change it pretty easy. What clutch should i put in?
Old 10-16-2008 | 04:22 AM
  #5  
BES Stroked Nova's Avatar
TECH Fanatic

iTrader: (24)
 
Joined: Oct 2004
Posts: 1,442
Likes: 2
From: Lawrenceburg Indiana
Default

Originally Posted by Revengracing14
ill have the motor out for the swap so i can change it pretty easy. What clutch should i put in?

textrailia oz700 and give Tick performance a call about their clutch master cylinder... cant beat that setup...
Old 10-16-2008 | 09:30 AM
  #6  
Mike94ZLT1's Avatar
TECH Fanatic
iTrader: (3)
 
Joined: Feb 2004
Posts: 1,455
Likes: 0
From: Livonia, Mi
Default

Originally Posted by stevied916
That's a decent clutch, I run it but have only a 346 with bolt ons.
And that is the only reason you like it. Add some more mods, and you will hate it.
Old 10-19-2008 | 06:58 PM
  #7  
Revengracing14's Avatar
Thread Starter
Teching In
 
Joined: Feb 2008
Posts: 9
Likes: 0
Default

alright.. motor update!! The shop in Arizona that i went through to build my motor called me. It was a good call. A customer backed out of a short block after a down payment.. So now im getting an ls3 that has been sleeved bored and stroked to a 427. comes with a cam thats a little bigger than the one i originally was going with, and im goin to run the etp heads instead of the AFR's. such a nice phone call tho.

Trending Topics

Old 10-19-2008 | 07:05 PM
  #8  
conan's Avatar
TECH Senior Member
iTrader: (5)
 
Joined: May 2004
Posts: 6,492
Likes: 6
From: Back in the Burg
Default

That one hell of good phone call. Sound like a its going to be bad *** when you get done.
Old 10-19-2008 | 07:10 PM
  #9  
Kingc8r's Avatar
11 Second Club
15 Year Member
iTrader: (21)
 
Joined: Jan 2008
Posts: 4,558
Likes: 52
From: SF Bay Area
Default

Should be a nice addition to your engine bay
Old 10-19-2008 | 07:16 PM
  #10  
Revengracing14's Avatar
Thread Starter
Teching In
 
Joined: Feb 2008
Posts: 9
Likes: 0
Default

I hope so.. the motor builder said that this shortblock with the cam he has for me made 600 crank hp with the stock ls3 heads and intake
Old 10-19-2008 | 07:22 PM
  #11  
01zx6arrrr's Avatar
Teching In
 
Joined: Aug 2008
Posts: 44
Likes: 0
Default

Who are you having do your work?
Old 10-19-2008 | 07:39 PM
  #12  
Revengracing14's Avatar
Thread Starter
Teching In
 
Joined: Feb 2008
Posts: 9
Likes: 0
Default

I am going through Xtreme motor sports in tempe. Im not sure who they have doing the machine work on the block
Old 10-19-2008 | 07:40 PM
  #13  
Revengracing14's Avatar
Thread Starter
Teching In
 
Joined: Feb 2008
Posts: 9
Likes: 0
Default

oh and i live in arizona if you didnt know. sry
Old 10-20-2008 | 03:26 AM
  #14  
01zx6arrrr's Avatar
Teching In
 
Joined: Aug 2008
Posts: 44
Likes: 0
Default

Yeah i read that, thats why i asked. I seem to hear pretty good things from them. Bought a few cheap parts from them.
Old 10-21-2008 | 09:56 PM
  #15  
Revengracing14's Avatar
Thread Starter
Teching In
 
Joined: Feb 2008
Posts: 9
Likes: 0
Default

yea the are really good. And they only really on vettes so i like having my car there.




All times are GMT -5. The time now is 07:39 PM.