WASHER
#1
Teching In
Thread Starter
Join Date: May 2003
Location: Surprise Az
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
WASHER
I lost a arp washer will pull my heads off. Is there any way to look around in the block from the top side or under the pan. Need info on any location that anyone might have lost there washer? Thank you for your input
#2
TECH Enthusiast
iTrader: (24)
Re: WASHER
Once you get the heads off you can fish it out of the pan with one of the long flexable magnets. When I droped a lifter in the pan I took the cam out and the metal plate the the knock sensors are in (under the intake) if you take that off theres a hole that you can go through on the top of the motor and get down to the pan. It might have just went down the oil return hole in the head and be sitting by the lifters. I droped a keeper down there. Good luck.
#3
TECH Apprentice
Join Date: Oct 2002
Location: san Antonio
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Re: WASHER
If it went into the pan you can use a big speaker magnet and use it to move the washer around in the pan. Remove the oil sensor in the side of the pan and try to fish it up through there. Good luck!
#5
TECH Addict
iTrader: (15)
Join Date: Sep 2002
Location: Gainesville, GA
Posts: 2,538
Likes: 0
Received 0 Likes
on
0 Posts
Re: WASHER
I found the washer in the intake valve on the passenger side head. dam piece of crap.