PTV clearance
Thread Starter
On The Tree
Joined: Dec 2005
Posts: 129
Likes: 0
PTV clearance I am trying to figure out what my PTV clearance would be with the following setup..
LS6 stage 1 PRC milled to 59cc
GM MLS gasket .054
Stock LS1 bottom end
MTI G1 Cam:
228/232 .588/.575 113+4
DURATION @ .050 INTAKE 228
DURATION @ .050 EXHAUST 232
DURATION .006 INTAKE C/L 109.0
TAPPET LIFT INTAKE 278 CAM ADVANCE 4
TAPPET LIFT EXHAUST 281 HYDRAULIC Y
I plan on checking it too but I want to know if there is even a chance it will work.
LS6 stage 1 PRC milled to 59cc
GM MLS gasket .054
Stock LS1 bottom end
MTI G1 Cam:
228/232 .588/.575 113+4
DURATION @ .050 INTAKE 228
DURATION @ .050 EXHAUST 232
DURATION .006 INTAKE C/L 109.0
TAPPET LIFT INTAKE 278 CAM ADVANCE 4
TAPPET LIFT EXHAUST 281 HYDRAULIC Y
I plan on checking it too but I want to know if there is even a chance it will work.
