Need help identifying which Manley duals I have
Need help identifying which Manley duals I have I bought a set of used heads with Manley duals on them and want to replace them before installation. The seller says these are good for .650, but I want to be certain what I have before ordering replacements since Manley appears to offer different widths.
I have a good caliper and would greatly appreciate any pointers on how to measure/identify these.
Thanks,
Dan
I have a good caliper and would greatly appreciate any pointers on how to measure/identify these.
Thanks,
Dan
A common Manley spring used was part#221426 good for .650 lift. The specs I have are 1.29O.D., Rate 337, 140lb@1.800, 385@1.150, coil bind 1.100. I drove these springs about 10000 miles on the street and had them pressure tested and they were like new.I don't see them on the Manley website anymore.
Yeah manley doesn't have them anymore. They came on a set of heads my buddy bought from MTI (Houston) years ago. We counldn't find a replacement on manley's site that had the same seat and open pressure and the inside diameter. We called thunder racing since he was using their cam (TR224) and they recommened dual patriot golds and the car has ran fine ever since with no issues
Thanks guys - the thing is, these springs came with ti retainers which I would like to retain(heh) but the cam I'm going with only has a .581" lift. Manley shows a dual set "with damper" good for .600, but the sizes are a bit different.
So Manley definetly doesn't put any markings on their springs? I'm waiting on Tim's tool to show up so I can pull one off and get a better look.
Thanks,
Dan
So Manley definetly doesn't put any markings on their springs? I'm waiting on Tim's tool to show up so I can pull one off and get a better look.
Thanks,
Dan
