Just wondering if you think im going to run into any issues with this setup

6L gen 3 iron block bored to 4.030
Wiseco -3.2cc pistons (valve reliefs)
Scat 6.123 H-beam rods
Stock crank
Patriot Stage II heads milled to 60cc
4.060 .040compressed Head Gaskets
MS3 Cam on a 114 +0

in the SCR and DCR calculator i get a 11.83 static compression and a 8.41 dynamic.

Am i going to run into any issues with PTV? and with a good tune i dont think i'll have any problems with 94 octane we have up here....