98 ls1
mods: slp smooth bellow lid mass air flow
k/n filter fast 90mm intake and ported 90
t/b kooks long tube headers hooker
muflers elc cut outs 322/326 cam
411 gears centerforce stage 3 clutch
dual friction this car was built and tuned
by vengance racing last dyno was 400rwhp but due to busy work sch
the car has been parked in my dads shop just
week i got her out to play the oil level looked good
smelt good car cranked ran ok a lil cold natured
due to the cam drove car just to heat it up a lil
gave it plenty time to warm up pulled over and went thru
the gears givving her hell when i shifted into third i noticed a
noise in the shifter and it got louder in 4 th 5th and 6 shifted perfect
just the noise in 3rd and 4th is this comen for these type of cars
please help it might have been doing this for a while just never noticed untill now car just has 70 k on her

 

Try the transmission section?

 

i had my transmission man check it and he said it was not the trany i forgot to mention it was a pro 5.0 shifter i dunno if that has anything to do with it i hope its not a spun berring

 

I don't think a spun bearing would care what gear the transmission is in. What does it sound like and where does it appear to be coming from?

 

man it kinda sounds like a rattle in the shifter like the shifter *** is loose the reason i say its prob the motor i was told that 4th gear is strait to the motor that u can here more in 4th gear

 

Maybe the shifter stick is vibrating against the adjustable shift stops on the pro 5.0? My Hurst was doing that in fourth, so I backed the stop up a hair and that cured it.

 

hey thanks a bunch man i hope thats it i would hate to go into the moror agin i plan on building the bottom end with a good set of heads this summer anyway tho