Engine write up?
Thread Starter
Registered User
Joined: Jan 2009
Posts: 2
Likes: 0
From: Hagerstown, MD
Engine write up? Well I finally diagnosed my motor to have a BAD rod knock and is about the blow any second. I am picking up a 350 small block 4 bolt Monday morning about an hour 1/2 from me. So I need to pull my motor out and get ready to swap my heads, cam, headers, intake, etc etc. I have never pulled a motor before but I am confident I can do it!! I have a nice hoist and all the right tools but was just wondering the best way to attack it. Does anyone know of a write up on engine removal for a 3rd gen?
Any tricks that I should know?
Any tricks that I should know?
You're on the wrong site homie 
Check this out...
http://www.thirdgen.org/techboard/?
You will find all your answers on 3rd gens there. Good luck
Check this out...
http://www.thirdgen.org/techboard/?
You will find all your answers on 3rd gens there. Good luck
Staging Lane
Joined: Oct 2008
Posts: 70
Likes: 0
From: DALLAS TX
Ima let you in on a secret of mine. www.mywebtraining.net, click on asep. Click on brookhaven shop menu. Find s.i. Local dvd. Now you have access to gm service info. Use it wisely. This is the data base for all technicians who work on gm vehicles. Your set for life.
Ima let you in on a secret of mine. www.mywebtraining.net, click on asep. Click on brookhaven shop menu. Find s.i. Local dvd. Now you have access to gm service info. Use it wisely. This is the data base for all technicians who work on gm vehicles. Your set for life.
