Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Need opinions....

Thread Tools
 
Search this Thread
 
Old 01-20-2009 | 03:34 PM
  #1  
stonemonk's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Jul 2005
Posts: 205
Likes: 0
Default Need opinions....

What are your thoughts on this set up? Wondering what it'd run.....

99z28 a4, 3.73 gears, stealth2 (or ls6) cam, ls6 intake, lid, cutout, 200shot w/ fjo starting w/ about 50 shot of the line and ramping it up fairly quick.
Old 01-20-2009 | 05:52 PM
  #2  
conan's Avatar
TECH Senior Member
iTrader: (5)
 
Joined: May 2004
Posts: 6,492
Likes: 6
From: Back in the Burg
Default

Are you keeping the cam small to avoid a stall? I would add some long tubes headers to your list.

Last edited by conan; 01-20-2009 at 08:09 PM.
Old 01-20-2009 | 05:59 PM
  #3  
Randy WS6's Avatar
TECH Addict
iTrader: (69)
 
Joined: Oct 2002
Posts: 2,755
Likes: 2
From: Baxter,KY.
Default

And some programing to tie it all together.
Old 01-20-2009 | 09:12 PM
  #4  
stonemonk's Avatar
Thread Starter
Launching!
iTrader: (12)
 
Joined: Jul 2005
Posts: 205
Likes: 0
Default

avoiding the big cam to keep the car a sleeper, id like to be able to claim it has a stock cam...... thats one of the reasons im kinda steering clear of headers..... id imagine they will make it too easy to hear the cam, i have a wideband and a hand held predator
Old 01-20-2009 | 10:12 PM
  #5  
conan's Avatar
TECH Senior Member
iTrader: (5)
 
Joined: May 2004
Posts: 6,492
Likes: 6
From: Back in the Burg
Default

We'll if your going for the sleeper... sounds like a good plan. I'm sure when the cut out opens and the 200 shot goes off you'll suprise a few people.




All times are GMT -5. The time now is 04:55 PM.