powerhouse brand rods
Thread Starter
TECH Fanatic
iTrader: (14)
Joined: Feb 2005
Posts: 1,089
Likes: 0
From: belleville, il
powerhouse brand rods anyone ever heard of them?
available from non sponsor link but they run about
170 for i beams a set
270 for h beams a set
i'd post a link but don't want to get into troubble try a google search and you will find the enginekits dealer
i tried searching with little success
-Erik
available from non sponsor link but they run about
170 for i beams a set
270 for h beams a set
i'd post a link but don't want to get into troubble try a google search and you will find the enginekits dealer
i tried searching with little success
-Erik
I'm going to bump this up. Was thinking about buying a set of their H-beams and putting some ARP 2000 rod bolts in. I'm going to post a link, not to advertise them, but because I was wondering if anyone has used them before. I know I've seen some guys building SBC/BBC use parts from this site with success.
https://shop.enginekits.com/osb/itemdetails.cfm?ID=2250
https://shop.enginekits.com/osb/itemdetails.cfm?ID=2250
That's what I was thinking. I saw them on ebay which made me very suspicious. But after some research from what I've seen they actually seem to be a decent product. Although for the same price I could just go with Scat I-beams with ARP caps. My goals are under 600rwhp so I think the I-beams will cut it.
