Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

hammer c2 question

Thread Tools
 
Search this Thread
 
Old Feb 13, 2003 | 01:30 AM
  #1  
blkfrmla925's Avatar
Thread Starter
Staging Lane
 
Joined: Aug 2002
Posts: 69
Likes: 0
From: mobile al
Default hammer c2 question

is the mti c2 cam to much for stock heads??..can i run a single spring or do i have to use dual?
thanks in advance
patrick
99 formula a4
Reply
Old Feb 13, 2003 | 10:38 AM
  #2  
blkfrmla925's Avatar
Thread Starter
Staging Lane
 
Joined: Aug 2002
Posts: 69
Likes: 0
From: mobile al
Default Re: hammer c2 question

TTT need some help guys thanks
patrick
Reply
Old Feb 13, 2003 | 10:45 AM
  #3  
akaceril's Avatar
TECH Senior Member
 
Joined: Sep 2002
Posts: 7,064
Likes: 0
From: Tacoma, WA
Default Re: hammer c2 question

it isn't too much if you upgrade the springs, pushrods, and retainers. to get the most out of it you will need an LS6 intake and LT's and tuning if your an A4. heads couldn't hurt either. but those are the basics.
Reply
Old Feb 13, 2003 | 11:33 AM
  #4  
Onyx LS1's Avatar
TECH Fanatic
iTrader: (5)
 
Joined: Nov 2001
Posts: 1,063
Likes: 0
From: Austin
Default Re: hammer c2 question

the c2 works well with stock heads
you can run a single spring, just change them ~yearly
Reply




All times are GMT -5. The time now is 05:48 PM.