Vibration!!!!!please help!!!!!

Reply Subscribe

Thread Tools

Search this Thread

Feb 19, 2009 | 09:44 AM

FBODYFEVA

Thread Starter

Teching In

Joined: Feb 2009

Posts: 21

Likes: 0

From: THE DELTA

Vibration!!!!!please help!!!!!

i have a vibration through the shifter when i rev the engine in neutral and driving.....guy i bought the car from said it has an ls7 clutch and vette ls2 flywheel.....he said to put a wear plate on the fly and get it balanced but i'm wondering if anyone has had this problem before.....

02 ss 35th....m6....red...

Last edited by FBODYFEVA; Mar 10, 2009 at 10:39 AM.

Feb 19, 2009 | 01:12 PM

blubox

Launching!

iTrader: (5)

Joined: Nov 2008

Posts: 237

Likes: 0

From: Houston

I have that same setup. I have a 5.0 shifter which is stiff so it vibrates a little but doesn't vibrate anymore when I rev then it does at idle..

Feb 20, 2009 | 10:57 AM

FBODYFEVA

Thread Starter

Teching In

Joined: Feb 2009

Posts: 21

Likes: 0

From: THE DELTA

yeah i have the 5.0 as well but this a vibration.....horrible i don even drive the car anymore in fear of destruction!!!! my shifter rattles a little....but all the pro 5's do.....

Feb 20, 2009 | 11:03 AM

gayslowassNALSjunk

Staging Lane

iTrader: (2)

Joined: Jul 2006

Posts: 83

Likes: 0

From: Hillview, KY

Replace the whole clutch kit. They're fairly cheap to replace.

Feb 20, 2009 | 05:48 PM

blubox

Launching!

iTrader: (5)

Joined: Nov 2008

Posts: 237

Likes: 0

From: Houston

I would change the mount before you change the whole clutch kit. I've heard of people getting crazy vibration out of the mount. Put a rubber mount on, see what happens.

Mar 5, 2009 | 09:28 PM

FBODYFEVA

Thread Starter

Teching In

Joined: Feb 2009

Posts: 21

Likes: 0

From: THE DELTA

preciate the help replaced mount and clutch/master still has vibration gonna try the flywheel next may be warped or need a wear plate...yay ls7 clutch flywheel parts so easy to find....NOT!!!

Mar 5, 2009 | 09:43 PM

SSCamaro2000

On The Tree

Joined: Feb 2007

Posts: 128

Likes: 0

From: Victoria, TX.

Quote:

Originally Posted by gayslowassNALSjunk

Replace the whole clutch kit. They're fairly cheap to replace.

+1, if your gonna do all the work to get to the flywheel you might as well just buy a whole new kit.

10 Reasons Daily Driving a Swap Project SUCKS! (& 1 Reason to Do It Anyway)

Michael S. Palmer

6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Brett Foote

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Mar 10, 2009 | 12:05 PM

greyghost4x4

Banging some gears

iTrader: (10)

Joined: Sep 2005

Posts: 868

Likes: 0

From: Mississippi

Get off my ls1tech bitch!!

Apr 1, 2009 | 01:09 PM

#10

FBODYFEVA

Thread Starter

Teching In

Joined: Feb 2009

Posts: 21

Likes: 0

From: THE DELTA

vibration fixed...gm performance ls7 clutch pressure plate and flywheel...the flywheel that was in the car is an all aluminum with a bolt on steel wear plate throwing the motor balance off....don even know if that flywheel is worth anything if you know anyone needing a ls7clutch and pressure plate they are still in great condition...flywheel looks good but do not know of an application for it...