LS1TECH - Camaro and Firebird Forum Discussion

Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Question about 317s

   
Old Feb 19, 2009 | 05:12 PM
Share
  #1  
95FbFormula's Avatar
95FbFormula
Thread Starter
TECH Fanatic
iTrader: (25)
 
Joined: May 2006
Posts: 1,148
Likes: 0
From: Canton, OH
Default Question about 317s
Did not find this in search how far can I mill 317s
Reply
0
Old Feb 19, 2009 | 09:12 PM
Share
  #2  
sroach20's Avatar
sroach20
TECH Addict
iTrader: (31)
 
Joined: Dec 2002
Posts: 2,318
Likes: 1
From: houston, Texas
Default
most of the time people do .030 to get close to the ls6 heads. but it really depends on what cam and what engine?
Reply
0
Old Feb 19, 2009 | 09:48 PM
Share
  #3  
95FbFormula's Avatar
95FbFormula
Thread Starter
TECH Fanatic
iTrader: (25)
 
Joined: May 2006
Posts: 1,148
Likes: 0
From: Canton, OH
Default
I will be using a cam in the 230s 240s 111-112 LSA on stock bottom end LQ4
Reply
0
Old Feb 19, 2009 | 10:10 PM
Share
  #4  
sroach20's Avatar
sroach20
TECH Addict
iTrader: (31)
 
Joined: Dec 2002
Posts: 2,318
Likes: 1
From: houston, Texas
Default
stock valves? you need to know the amount of lift you are going to use also.
Reply
0
Old Feb 20, 2009 | 09:52 AM
Share
  #5  
95FbFormula's Avatar
95FbFormula
Thread Starter
TECH Fanatic
iTrader: (25)
 
Joined: May 2006
Posts: 1,148
Likes: 0
From: Canton, OH
Default
Stock valves 610 to 650 lift.
Reply
0
Old Feb 20, 2009 | 11:34 AM
Share
  #6  
sroach20's Avatar
sroach20
TECH Addict
iTrader: (31)
 
Joined: Dec 2002
Posts: 2,318
Likes: 1
From: houston, Texas
Default
with the size cam you are planning on running, you would be best to measure after you install the cam. the 111-112 lsa with a high lift are going to limit the amount you can mill unless you plan on flycutting.
Reply
0
Old Feb 20, 2009 | 11:59 AM
Share
  #7  
95FbFormula's Avatar
95FbFormula
Thread Starter
TECH Fanatic
iTrader: (25)
 
Joined: May 2006
Posts: 1,148
Likes: 0
From: Canton, OH
Default
Ya I think I will probably mill them .030 and use a .040 gasket and see what room have to work with.
Reply
0

Trending Topics

Old Feb 20, 2009 | 09:06 PM
Share
  #8  
sroach20's Avatar
sroach20
TECH Addict
iTrader: (31)
 
Joined: Dec 2002
Posts: 2,318
Likes: 1
From: houston, Texas
Default
your going to be cutting it really close, good luck.
Reply
0
Old Feb 20, 2009 | 09:42 PM
Share
  #9  
skyhighsami's Avatar
skyhighsami
no title here
iTrader: (8)
 
Joined: Jun 2007
Posts: 2,272
Likes: 2
From: Montgomery, AL
Default
Def check PTV
Reply
0
Old Feb 21, 2009 | 12:01 AM
Share
  #10  
Roller406Bu's Avatar
Roller406Bu
On The Tree
iTrader: (1)
 
Joined: Apr 2006
Posts: 171
Likes: 0
From: Kentucky
Default
I cut mine .020 with a ms4 and stock gm mls with no issues on a stock lq4
Last edited by Roller406Bu; Feb 21, 2009 at 12:42 AM.
Reply
0
Old Feb 21, 2009 | 12:10 AM
Share
  #11  
SOMbitch's Avatar
SOMbitch
TECH Senior Member
iTrader: (8)
 
Joined: Sep 2007
Posts: 6,881
Likes: 3
Default
Originally Posted by 95FbFormula
Did not find this in search how far can I mill 317s
Damn what a vague question

Depends on on lot of things you do not elaborate on so this is really a moot question........
Reply
0
Back to Subforum
Generation III Internal Engine
View Next Unread
head gasket


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 04:43 AM.