Head/cam build need help!
Head/cam build need help! Hey everyone im in the middle of doin my heads and cam, and i was wonderin if i could get some help. I have to still get a ls6 ported oil pump, ls2 timing chain and gear, ls7 lifters, and a few more things. I was wonderin if someone could point me in the right direction to find these parts for the best deal out there on the net or wereever. I would really appreciate the help. thanx.
Also just some opions on what kind of hp when im done?
243 heads fully ported and polished, milled 60cc, int 2.00, ext.600
Custom comp cam, 230/236 .612 .601 144 lsa matched to heads.
Hooker long tubes, slp full exaust loudmouth
ls6 intake
slp cold air
purchasing- need help finding these!
LS6 ported oil pump GM/slp ?
ls2 timing chain and gear
Harden pushrods
Rockers?(not sure if need new ones, if so can i get an opion?)
ls7 lifters
Anymore opions on parts to get? Also any guess when tuned the hp ill b around? Thanku to anyone who helps out.
Also just some opions on what kind of hp when im done?
243 heads fully ported and polished, milled 60cc, int 2.00, ext.600
Custom comp cam, 230/236 .612 .601 144 lsa matched to heads.
Hooker long tubes, slp full exaust loudmouth
ls6 intake
slp cold air
purchasing- need help finding these!
LS6 ported oil pump GM/slp ?
ls2 timing chain and gear
Harden pushrods
Rockers?(not sure if need new ones, if so can i get an opion?)
ls7 lifters
Anymore opions on parts to get? Also any guess when tuned the hp ill b around? Thanku to anyone who helps out.
Be sure to check PTV clearance with that setup. I have TFS 215's milled to 61cc with a 232/236 .595/.578 113+3. Everyone said I would be fine without flycutting. Turns out I only had 0.040 clearance on intake at 11 deg. ATDC. So....I ended up flycutting my pistons for the intake 0.090!
Im putting in a set up just like this in my z28. ported ls6 heads and a ms4 cam. the parts your looking for can be found at thunder racing or texas speed. but if you want cheeper used parts check out the classifieds on here. my post should be a few down check it out if you want.
