Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

cam help

Old Nov 2, 2003 | 09:01 PM
  #1  
Red01Chevy's Avatar
Thread Starter
10 Second Club
20 Year Member
 
Joined: Mar 2003
Posts: 346
Likes: 0
From: pierre part louisiana
Question cam help

just ordered pacesetter LTs, now which cam would be best choice i have 3.73 at home waiting to be installed i WILL stay with a stock converter, im looking for something with a nice lope but this is my dayly driver.
Reply
Old Nov 2, 2003 | 09:07 PM
  #2  
jrp's Avatar
jrp
SN95 Director
20 Year Member
iTrader: (16)
 
Joined: Jul 2003
Posts: 10,755
Likes: 7
From: Valencia, Ca
Default

with the stock converter i wouldnt get to wild and honestly i'd get a new TC before i got a cam.

i wouldnt go higher then a 224 on stock covertor or else it'll take you forever to get into the powerband. no sense in limiting yourself on cam choices because you want to stay on the stock stall.
Reply
Old Nov 2, 2003 | 09:39 PM
  #3  
Red01Chevy's Avatar
Thread Starter
10 Second Club
20 Year Member
 
Joined: Mar 2003
Posts: 346
Likes: 0
From: pierre part louisiana
Default

wt would be your recommendations i was thinking comp 220/224 .52x/.53x 112 , TR220 or 224 on a 112 , or MTI C1
What would you recommend
Reply
Old Nov 2, 2003 | 10:04 PM
  #4  
jrp's Avatar
jrp
SN95 Director
20 Year Member
iTrader: (16)
 
Joined: Jul 2003
Posts: 10,755
Likes: 7
From: Valencia, Ca
Default

Originally Posted by Red01Chevy
wt would be your recommendations i was thinking comp 220/224 .52x/.53x 112 , TR220 or 224 on a 112 , or MTI C1
What would you recommend
out of those i would go with the tr220 on the 114. the gears will help but i still think that the TC is the best mod for you. or consider a stealth cam or 03 ls6 cam.

but honestly i wouldnt get a small cam, then down the road get a TC (which i know you will ), and get other mods and then be limited on your potential because you went with a small cam and later want a bigger one.

your sig doesnt list a "lid/filter". if you dont have one i'd get that before a cam. build up your intake and exhaust setup before going the cam route.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:13 PM.