Opinions on forged 346 setup
Opinions on forged 346 setup might pick this up for a great price if it works out. need some opinions on the setup. plan on spraying 100-150 shot with an f13 cam. thanks:
*SHORT BLOCK* (0 miles except on crank, pistons, and block on another setup)
-LS1 Block
-Polished GM Crank (50 mi)
-Probe UltraLight 6.125" Forged I-Beam Rods
-Ross 3.905 Forged Pistons -4cc (50 mi)
-Total Seal Advanced Profiling Rings
-Clevite LS1 main bearings
-Dura-Bond GenIII cam bearings
-GM main caps
-complete ARP Bolts
Absolute stage2 heads(853) 0 miles on valvetrain
ti retainers, etc
valve job @ CSM
milled to 62cc
Manley valves 2.02/1.60
PP Golds .660 lift
*SHORT BLOCK* (0 miles except on crank, pistons, and block on another setup)
-LS1 Block
-Polished GM Crank (50 mi)
-Probe UltraLight 6.125" Forged I-Beam Rods
-Ross 3.905 Forged Pistons -4cc (50 mi)
-Total Seal Advanced Profiling Rings
-Clevite LS1 main bearings
-Dura-Bond GenIII cam bearings
-GM main caps
-complete ARP Bolts
Absolute stage2 heads(853) 0 miles on valvetrain
ti retainers, etc
valve job @ CSM
milled to 62cc
Manley valves 2.02/1.60
PP Golds .660 lift
Last edited by 1Loudz28; May 11, 2009 at 03:04 PM.
