need some help on determining a few things...
11-15-2003, 06:08 PM
#1
8 Second 6 Speed Director
Thread Starter
iTrader: (6)
Join Date: May 2002
Location: windsor, ont. canada - Home of the fastest LT1 6spd.
Posts: 3,293
Likes: 0
Received 1 Like
on
1 Post
need some help on determining a few things... can anyone provide formula to calculate compression ratio?
how much of a difference will going from 64.5cc combustion chamber to 76cc combustion chamber make in overall compression ratio? is there a general rule of thumb, ie. .005' = to 1 compression point.
thanks in advance
taner
how much of a difference will going from 64.5cc combustion chamber to 76cc combustion chamber make in overall compression ratio? is there a general rule of thumb, ie. .005' = to 1 compression point.
thanks in advance
taner
11-17-2003, 08:57 PM
#3
TECH Junkie
iTrader: (4)
Join Date: Jul 2002
Location: Atlanta, Georgia!
Posts: 3,078
Likes: 0
Received 0 Likes
on
0 Posts
Ok, this is a sticky at the top of this forum.
https://ls1tech.com/forums/advanced-engineering-tech/111207-ls1-head-combustion-chamber-cc-volume-vs-cr.html
https://ls1tech.com/forums/advanced-engineering-tech/111207-ls1-head-combustion-chamber-cc-volume-vs-cr.html