I need help bad!
Thread Starter
TECH Regular
Joined: Aug 2003
Posts: 483
Likes: 0
From: Texas
I need help bad! Well heres the story i was goin to my friends house and all of a sudden my engine started over revvin hard so i turned it off and popped my hood open and my throttle cable was stuck all the way open so i just put it back and everything was fine then the next morning i started my car sounded just fine then i picked up one of my friends and it started knockin once i got to his house and then it wouldnt idle on its own.
Yall think i bent a couple of my pushrods by over revvin it to much or what? The knockin noise is startin to get louder i think.
Yall think i bent a couple of my pushrods by over revvin it to much or what? The knockin noise is startin to get louder i think.
Thread Starter
TECH Regular
Joined: Aug 2003
Posts: 483
Likes: 0
From: Texas
Well My friend just threw a rod on his motor and it was knockin LOUD and mines not as near as loud as his was but its startin to get louder? Should I drain my oil for any metal shavings or anything?? What kind of pushrods do I need to order?
Well if my pushrods are the problem should I go ahead and get new heads and a cam cause i just checked the head swap install from ls1howto.com and it doesnt look to hard.
Well if my pushrods are the problem should I go ahead and get new heads and a cam cause i just checked the head swap install from ls1howto.com and it doesnt look to hard.
Thread Starter
TECH Regular
Joined: Aug 2003
Posts: 483
Likes: 0
From: Texas
So all I need to do is take off my valvecovers and unbolt the rockers to check the pushrods? Also what else could have broke or whatever due to overrevvin it?
Last edited by UGotBeaT; Nov 20, 2003 at 03:14 PM.
