cam install need suggestions !
cam install need suggestions ! im doing a cam install when i get back from afghanistan in NOV i have some parts! need someone to install everything I currently have fast92intake/tb fuel rail kit, slp UD pully electric cutout,ls7 lifter and a 588/595 comp n20 cam magnum7.4 PRs comp918 springs rated a .600 on some not so great ported heads! im only goning to spay 100shot on the car even know ill probally never use it. i need help finihing up my parts list open to suggustions Might be easier to email me @ david.lindley@afg.usmc.mil the internet here blows took 30 mins to load this site thanks !
whats the duration of the cam, and the LSA? thats alot more useful than lift, which really doesnt mean a whole lot.
id say that s a pretty good start. might want some new plugs if you are spraying too, as well as some RRs if you are high mileage.
id say that s a pretty good start. might want some new plugs if you are spraying too, as well as some RRs if you are high mileage.
I really like the pickup tube girdles from BRP Hotrods helps to eliminate the chances of pinching an oring on re installation. I run them on anything I get my hands into that little $20 could save you a lot of headaches and trouble later on.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote I am sure if you had it out of alignment bad enough to pinch the oring completely in half it might not help. The girdle strengthens the holding force, and actually centers the tube much better then the stock setup. Probably one of the neatest little pieces I can think of for LS internals.
TECH Enthusiast
Joined: Feb 2009
Posts: 661
Likes: 0
Don't forget to upgrade your fuel capacities very soon I will be cam only and 100 shot like you and it was strongly recommended that I upgrade my injectors and fuel pump. You will probably need to do the same.
thanks for the info! Ill try and get the cam specs! i have a race tronics plug and play fuel pump intalled and my heads are already assembled with everything and are ready to go! also what about the maf and bellows im going from stock to 92mm throttlebodie do i need a 92mm everything ?