MS4 cam with stall

Reply Subscribe

Thread Tools

Search this Thread

Aug 25, 2009 | 03:34 PM

BIG BILL 2000 Z

Thread Starter

On The Tree

Joined: Jul 2009

Posts: 191

Likes: 0

From: Overland Park KS

MS4 cam with stall

will a ms4 cam work well with a 4200 stall (yank)
i have a 2000 Z A4

Aug 25, 2009 | 03:38 PM

TransAmcoupe98

Banned

iTrader: (10)

Joined: Mar 2008

Posts: 1,210

Likes: 2

From: Winchester, TN

Thats a perfect size for that cam. The smallest I would go with an MS4 is a 4000. Do you know the STR?

Aug 25, 2009 | 03:55 PM

BIG BILL 2000 Z

Thread Starter

On The Tree

Joined: Jul 2009

Posts: 191

Likes: 0

From: Overland Park KS

this is what i know about the cam: i havent bought it yet

some of the specs @ 0.050 are

LSA 111.3 cam deg.
ICL 111.29 ATDC
Intake duration 235.5
Exhaust duration 242.8
Int. valve lift 0.64997
Exh. valve lift 0.60717

ps- will this cam be okay without a tune? i will have to drive it like 100 miles to the guy who will be tuning it

Aug 25, 2009 | 04:01 PM

TransAmcoupe98

Banned

iTrader: (10)

Joined: Mar 2008

Posts: 1,210

Likes: 2

From: Winchester, TN

Quote:

ps- will this cam be okay without a tune? i will have to drive it like 100 miles to the guy who will be tuning it

Similar question asked in another thread. I doubt the car will even stay running with that cam. If it were me, I would get a generic tune for now to supply more air and raise the idle up a couple hundred rpm's. The drive it to the shop for a dyno tune. Without tuning it, you risk fuel fouling out your plugs along with other more severe problems. I would absolutely baby it if you do.