Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Cam Clips

Old Nov 27, 2003 | 02:34 AM
  #1  
SilverStunna's Avatar
Thread Starter
Staging Lane
 
Joined: Nov 2003
Posts: 50
Likes: 0
From: Scottsdale, Arizona
Default Cam Clips

Does anyone have a sound clip of a big cam through their exhaust, not cutout. I am trying to figure out what a g5x1, tr230, etc would sound like going through preferably a loundmouth cat back like mine. I plan on putting headers and a nice size cam in soon, just want to know what it would sound like. I don't want anything outrageous. I want something that will give me alot of power but keep my dependability of my car for daily driven and because i have an a4 maybe something on a 113 or 114 lsa. Any info is appreciated, thanks.
Reply
Old Nov 27, 2003 | 05:55 AM
  #2  
jrp's Avatar
jrp
SN95 Director
20 Year Member
iTrader: (16)
 
Joined: Jul 2003
Posts: 10,755
Likes: 7
From: Valencia, Ca
Default

you just contradicted yourself. first you want clips of the g5x1 and tr230 and then you say you want a 113-114lsa. the x1 has a 112lsa and the 230 has a 111lsa. your better off with just the tr224 on the 114. anyway, heres my 230 pre/post cam idle clip.

copy past the url into your windows media browser.

http://www.imagestation.com/picture/...8/facac7a3.mpg
Reply
Old Nov 27, 2003 | 04:18 PM
  #3  
SilverStunna's Avatar
Thread Starter
Staging Lane
 
Joined: Nov 2003
Posts: 50
Likes: 0
From: Scottsdale, Arizona
Default

Well how would the g5x1 on the 112 be on my auto if it was tuned properly? Would I pass emissions?
Reply
Old Nov 27, 2003 | 04:23 PM
  #4  
HOTROD98Z's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Oct 2002
Posts: 1,042
Likes: 0
From: Molino, FL
Default

What are the specs on the G5X1? It would definately have a lope to it but there are plenty of guys running 112lsa on autos so you shouldn't have too big of a problem. However i really dont see it passing emissions, do you just have the sniffer in Arizona or do you have to plug up to the diag. port?
Reply
Old Nov 27, 2003 | 05:13 PM
  #5  
jrp's Avatar
jrp
SN95 Director
20 Year Member
iTrader: (16)
 
Joined: Jul 2003
Posts: 10,755
Likes: 7
From: Valencia, Ca
Default

Originally Posted by SilverStunna
Well how would the g5x1 on the 112 be on my auto if it was tuned properly? Would I pass emissions?
229/233 -.575/.585 on a 112. if you have to pass the sniffer forget it. OBDII would pass. the cams you are talking about are mid-top end cams. unless you have a new TC to match the new powerband the for get it also. cams should not be one of the first mods. get a few more bolt ons and set up your car right for a cam or go smaller.
Reply
Old Nov 27, 2003 | 07:58 PM
  #6  
BergerMan's Avatar
Launching!
 
Joined: Jun 2003
Posts: 233
Likes: 0
From: St. Louis, MO
Default

Here is an idle clip of my C5 with the G5X2 (112 lsa) and AS 5.3L Stage-2 Heads, FLP Headers, FLP High Flow Cats, FLP X-Pipe and Corsa Indy CatBacks.
http://temp.corvetteforum.net/c5/mtw...adcam-idle.wmv
Reply
Old Nov 27, 2003 | 09:52 PM
  #7  
SouthFL.02.SS's Avatar
!LS1 11 Second Club
 
Joined: Apr 2003
Posts: 7,133
Likes: 2
From: Miami
Default

Here's a clip from my setup. TSP 231/237 through SLP LT's, Y, and stock 2.75" I and over the axle into a 3" dual outlet Spintech. Stock heads.

Revs - cutuot closed
Idle - cutout open

http://www-scf.usc.edu/~chutchin/ls1/TSP_231_237.wmv
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:37 AM.