mark.deady

iTrader: (9)

hello every one... i was wondering if a lunati cam 240/240 .635 .635 112LSA will work with my set up... i have been looking in to the ms3, 233 239's but i found this one on hear for a good price... i think that it might be just a bit to big for my car but i wanted to see waht you all thought... i will be using a set of prc duals reguardless of the cam i go with.... i also will have a 80 mm tb on the way as well... thanks for the help...

mark

ssdeuce74

iTrader: (2)

sounds to big for a car without deep gears the m6 will help but it might feel dogish in the low end

mark.deady

iTrader: (9)

i have plans for a set of 410 later will they help it.... thanks

SweetS10V8

iTrader: (4)

WAY to big....by a country mile!!!

Something like COMPs LSR cam 223/231 .610/.614ish with matching 26926 springs would be a much better selection since your engine is almost stock.

69LT1Bird

iTrader: (1)

Also the 80mm TB and a stock intake isn't going to cut for airflow.

mark.deady

iTrader: (9)

thanks guys that was what i was looking for... the cam that i have been looking at for a long time has been the 233 239 from tsp... also 69tl1bird.... would it mater that i have a ls6 intake... thanks mark

69LT1Bird

iTrader: (1)

It should help, a FAST 92/92 would of course be better.