Telling driver side from passenge side coil packs
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Feb 2003
Posts: 1,527
Likes: 0
From: bridgwater, nj
Telling driver side from passenge side coil packs After mounting my coil packs, I notice that, even though they are mounted to a bracket, it's possible to get them mixed up. The coil pack bolt pattern is flip flopped on each side, which can allows either bracket to mount to it. I tried to keep them seperate and am 99% sure I have them on their appropriate side, but I thought that the bolt pattern would be different.
Are there any markings, indicaters that the designate the appropriate side assuming that the coil packs are not the same? If they are wired exactly the same then I don't see a problem, but I haven't inspected this yet. Thanks
Are there any markings, indicaters that the designate the appropriate side assuming that the coil packs are not the same? If they are wired exactly the same then I don't see a problem, but I haven't inspected this yet. Thanks
coil packs themselves are all identical.
The harness between the coil packs and the engine harness is marked. Marked 1/8 on one end, just make sure that one is on the appropriate end of the motor and plug the rest in in order.
The harness between the coil packs and the engine harness is marked. Marked 1/8 on one end, just make sure that one is on the appropriate end of the motor and plug the rest in in order.
