01FbTaWs6

iTrader: (12)

hey guys, what info can you give me on the old MTI Stage 2E 853 casting heads??? Have a line on a set CHEAP. Wondering if I could get any info from you guys about the heads. Worth it? pass? flow numbers? even pictures would be nice! Im looking for advise from people who arent all onto the "cnc porting only" rage. Thanks in advance guys, Rodney Pierce

RENE'S RAGE

iTrader: (96)

These heads were the top of the line back in the day. Just as good as any other after market head except TFS, AFR , ETP. IMO

Had some on my MTI 382.

KH504

iTrader: (3)

Look in the drag racing results section under 11.02 @120 stock bottom end . The heads I have are the ones with 2.055 intake valves dont know the flow numbers my buddy bought them new in 02.

eamador11

They are excellent heads and always put down great power!

BAD2000TA

iTrader: (6)

Yes - another endorsement for these heads. MTI did great work on heads and the performance at the track proved it. If you have the chance to pick them up, you won't be disappointed.