ls6 heads milled???
01-07-2010, 02:16 PM
#1
12 Second Club
Thread Starter
iTrader: (34)
Join Date: Dec 2006
Location: READING Pa
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
ls6 heads milled??? i bought a car with a motor built by lingenfelter its their heads/cam 450hp performance pack the motor was in an 04 gto im trying to find out how much the heads were milled cause im changing cams and want to watch for ptv clearance the heads are 243 cnc ported and polished...my pushrod length is 7.200" their the comp cams magnum #7608 cam is a lingenfelter gt11 let me know what you guys need in order to figure it out if you can thanks
01-07-2010, 03:11 PM
#3
i bought a car with a motor built by lingenfelter its their heads/cam 450hp performance pack the motor was in an 04 gto im trying to find out how much the heads were milled cause im changing cams and want to watch for ptv clearance the heads are 243 cnc ported and polished...my pushrod length is 7.200" their the comp cams magnum #7608 cam is a lingenfelter gt11 let me know what you guys need in order to figure it out if you can thanks
01-07-2010, 08:51 PM
#5
TECH Enthusiast
iTrader: (14)
Join Date: Jun 2006
Location: Mohnton, pa
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Take them to rich and he will cc them and stuff for free prolly. I doubt they were milled that much that your gonna have an issue. Ive seen people run the cam with stock pistons alot i dont think it will be a problem get the cam and we can stick it in and bolt the heads on with no gasket and check ptv see where your at.
